9. Selecting the Density Adjustment Method for Standard Mode ( )1) Hold down the AE key for 4 sec or more.• The display indicates “ ”.2) Enter o using the keypad so that the display indicates “ ”.3) Press the Start key.• The display indicates ‘9-1’.Table 1-4074) Enter q or p using the keypad to select AE or manual so that the display indicatesthe new specification (if manual, indicates ‘9-0’).5) Press the Start key.• The new specification is stored, and the display returns to “ ”.6) Press the AE key.• The copier returns to standby state.10. Initializing User Mode ( )1) Hold down the AE key for 4 sec or more.• The display indicates “ ”.2) Enter p using the keypad so that the display indicates “ ”.3) Press the Start key.• The display indicates ‘0-1’.4) Enter p using the keypad.• The display indicates “ ”.5) Press the Start key.• User mode is initialized, and the display returns to “ ”.6) Press the AE key.• The copier returns to standby state.COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 1 GENERAL DESCRIPTION1-17Selecting the density adjustment method for standard modeAE (automatic)ManualSettings9-19-0
