B. Turning On the CopierStep12345678CHAPTER 8 INSTALLATIONCOPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-5WorkConnect the power plug to thepower outlet.Turn on the power switch.Turn off the power switch.Supply toner according to theinstructions given on the tonersupply label attached behindthe front door.Release the developingassembly by the developingassembly locking lever.Install the drum unit.Lock the developing assembly,and close the copier’s top unit.Insert the door switch activatorinto the door switch, and turnon the power.Remarks• Make sure that the power outlet is the rating±10%.Make sure that the Add Paper message flashes.• Press the keypad and the Clear key to makesure that the copy count indication is correct.When turning the toner cartridge counterclock-wise to set it, you must fully turn it until it islocked; the developing assembly can cause afault if you operate the machine without lockingthe cartridge.See “D. Attaching the Drum Unit.”Caution:Caution:
