4) Remove the three screws r, and detach the blank exposure lamp t.Figure 4-3125. Detaching the Blank Shutter Solenoid1) Detach the blank exposure assembly.2) Detach the blank shutter upper plate, and disconnect the connector q. (See “3.Detaching the Blank Exposure Assembly on p. 4-34.”)3) Remove the E-ring w, and detach the link arm e from the blank shutter.4) Remove the two screws r, and pull out the blank shutter solenoid.Figure 4-313COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-36rterq w
