4. Points to Keep Note When Attaching the Multifeeder Pick-Up RollerWhen attaching the multifeeder pick-up roller q, make sure that the side with a crossw on the collar is toward the rear.Figure 5-7205. Detaching the Separation Pad1) Open the upper right door.2) Remove the two screws q, and detach the separation pad w.Caution:At this time, take care not to lose the spring on the separation pad assembly.Figure 5-721COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-26(front of copier)21wq
