D. Transfer Charging Assembly1. Detaching the Transfer Roller1) Open the front door.2) Open the copier’s top body.3) Detach the static eliminator.4) Detach the bushing q, and lift the transfer roller w to detach.Figure 4-324Caution:Do not touch the surface of the roller.Do not soil the surface of the roller.2. Attaching the Drum Heater1) Detach the front cover.2) Open the copier’s top body by operating the copier open/close lever.3) Detach the inside cover.4) Remove the three fixing screws w, and detach the harness cover q.Figure 4-325COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 4 IMAGE FORMATION SYSTEM4-44
