2. Common Operationsa. Keys to Use in User Mode• Clear KeyUse it to return to the previous step; or, use it to clear a setting entered by mistakewhen making mode settings.• Start KeyUse it to accept a selected item when making user mode settings.• AE KeyUse it to return to copy mode when making user mode settings.b. Operation1) Hold down the AE key for about 4 sec or more.• This will turn on the display, indicating “ ”.2) Enter the menu number of each function using the keypad.3) Press the Start key.• The current setting of the respective function appears.4) Enter a new setting using the appropriate key.5) Press the start key.• The copy count/ratio indictor turns on to indicate the user mode being changed.• The setting of the respective user mode is changed.6) Press the AE key.• The copier returns to standby state.3. Changing the Auto Clear Time ( )1) Hold down the AE key for 4 sec or more.• “ ” appears on the display.2) Press the Start key.• The display indicates the current setting (if initial, indicates ‘1-2’).3) Enter a desired setting using the keypad.• The display indicates the new setting (if 5 min, indicates ‘1-5’).4) Press the Start key. “ ”5) Press the AE key.• The copier returns to standby state.4. Changing the Auto Power-Off Time ( )1) Hold down the AE key for 4 sec or more.• “ ” appears on the display.2) Enter ‘2’ using the keypad so that the display indicates “ ”.3) Press the Start key.• The display indicates the current setting (if initial, indicates ‘2-2’).4) Enter a desired setting using the keypad.COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 1 GENERAL DESCRIPTION1-13
