E. Cassette Feeding Module1. Detaching the Copier from the Cassette Feeding Module1) Disconnect the copier’s power plug.2) Disconnect the connector q of the cassette feeding module.Figure 5-7373) Hold the copier’s grips, and detach the copier from the cassette feeding module.2. Detaching/Attaching the Pick-Up RollerSee p. 5-14 “1. Detaching the Pick-Up Roller Unit”, p. 5-17 “2. Detaching the Pick-UpRoller” and p. 5-18 “3. Points to Note When Attaching the Pick-Up Roller.”3. Detaching the Pick-Up Clutch1) Detach the pick-up drive unit. (See p. 7-14 “1. Detaching the Pick-Up Drive Unit.”)2) Detach the cassette motor. (See p. 7-15 “2. Detaching the Cassette Motor.”)3) Remove the three screws q, and detach the bushing w and side plate e; then,detach the pick-up clutch r.Figure 5-738COPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 5 PICK-UP/FEEDING SYSTEM5-36rqweq
