3. Positioning the Paper Guide Plate Cam (multifeeder)Temporarily fix the screw with a hex nut of the spring clutch assembly in place; turnthe control ring. Make adjustments so that the hole in the cam and the hole in themultifeeder drive unit match as indicated in Figure 10-233 when the claw of the controlring is engaged with the solenoid; then, fix in place.Figure 10-23310-26CHAPTER 10 TROUBLESHOOTINGCOPYRIGHT © 1997 CANON INC. CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
