Chapter 14 Summary of Settings 14-7Summary ofSettingsECM RXRX MODEINCOMING RINGRING COUNTMAN/AUTO SWITCHF/T RING TIMEREMOTE RXREMOTE RX IDMEMORY RXRX PAGE FOOTEREnables/disables Error Correction Mode (ECM) duringreception.Selects the receive mode (1 Chapter 8).If you select FAX/TEL AUTO SW or DRPD, you canselect additional sub-settings (1 pp. 8-4, 8-10).When the RX MODE setting is set to FAX ONLY MODEor FAX/TEL AUTO SW, this setting enables/disablesringing when the machine receives a call.*Selects the number of rings before the machine beginsreceiving.When the receive mode is set to MANUAL MODE, thissetting determines if the machine switches to faxreceive mode after it rings for a specified time.If you select ON above, this setting selects the length oftime the machine rings before switching to fax receivemode.Enables/disables remote receiving.If you select ON above, this setting selects the remotereceiving ID.Enables/disables reception of a document in themachine’s memory when a problem occurs.Enables/disables printing of the reception date and time,transaction number (TX/RX NO.), and page number atthe bottom of each received fax page.ONOFFFAX/TEL AUTO SWFAX ONLY MODEDRPDOFFON2 TIMES(1 to 99)OFFON15 SEC(1 to 99)ONOFF25(00 to 99)ONOFFOFFON* Even if you have set INCOMING RING to ON, ringing will only occur if you have connected the handset or anextension telephone to your machine.RX (Reception) SETTINGS MenuFor details on accessing the settings below, see p. 14-3.Default settings are shown in bold type.Setting Description Sub-Settings
