9-16 Special Features Chapter 9Restricting ReceptionBy enabling this feature, you can restrict reception of faxes to only the numbersregistered for speed dialing on your machine. This feature is useful to prevent receptionof unsolicited faxes (e.g. junk mail).Follow this procedure to enable or disable receiving restriction:1 Open the one-touch speed dialing panel.2 Press Data Registration.3 Press Set.4 Use ∂ or ¨ to select SYSTEMSETTINGS.5 Press Set twice.6 Use ∂ or ¨ to select the setting youwant.• You can select from the following:– ON (Enable restriction)– OFF (Disable restriction)■ If you selected ON in step 6:7 Press Set twice.8 Use ∂ or ¨ to select the restrictiontype setting you want.• You can select from the following:– REGISTERED SENDRTo allow reception from the numbersregistered for speed dialing.– WITH SENDER INFOTo allow reception only when thecaller gives its telephone number.9 Press Set.10 Press Stop to return to the standby mode. 12/27 FaxTelDATE SETUPREGISTERED SENDRRX CONDITIONOFFRX RESTRICTIONSYSTEM SETTINGSUSER SETTINGSDATA REGSTRATION