Chapter 8 Receiving Faxes 8-3Receiving FaxesReceiving Both Faxes and Telephone CallsAutomatically: Fax/Tel ModeSet this mode if you only have one telephone line for fax and telephone use and wantyour machine to automatically switch between fax and voice calls.Setting Fax/Tel ModeYour machine is factory-set to Fax/Tel Mode. If you have not changed the receivemode to FAX ONLY MODE or DRPD, simply follow this procedure:1 Press Receive Mode repeatedly untilFax/Tel Mode is displayed.• After a few seconds, the LCD changesto this display:If Fax/Tel Mode does not appear in the LCD when you press Receive Mode, followthis procedure to set FAX/TEL AUTO SW (Fax/Tel Mode):1 Open the one-touch speed dialing panel.2 Press Data Registration.3 Press Set.4 Use ∂ or ¨ to select RX SETTINGS.5 Press Set.6 Use ∂ or ¨ to select RX MODE.7 Press Set.8 Use ∂ or ¨ to select FAX/TEL AUTO SW.9 Press Set.• To set the options for FAX/TEL AUTO SW(Fax/Tel Mode), see the following pages.10 Press Stop to return to standby mode.11 Confirm that FaxTel is displayed in the LCD.• If FaxTel is not displayed, press Receive Moderepeatedly until Fax/Tel Mode is displayed. After afew seconds, the LCD returns to standby mode.12/27 FaxTel12/27 FaxTelRING START TIMEFAX/TEL AUTO SWFAX ONLY MODERX MODEECM RXRX SETTINGSUSER SETTINGSDATA REGSTRATION12/27 FaxTelFax/Tel Mode
