8-10 Receiving Faxes Chapter 8Receiving With the Distinctive Ring Pattern DetectionFeature: DRPD• Choose this mode if:• you only have one telephone line for both fax and telephone use.• you want to receive faxes automatically as well as voice calls.• you have subscribed to a DRPD (Distinctive Ring Pattern Detection) service withyour telephone company. This service assigns two or more telephone numbers withdistinctive ring patterns to a single telephone line, allowing you to have both a faxnumber(s) and a telephone number(s) using only one telephone line. Your machinewill automatically monitor incoming calls and based on the ring pattern, will let youknow if the call is a fax or voice call. Contact your telephone company for moreinformation on this service.• You will need to:• subscribe to a DRP service offered by some telephone companies.• connect the handset to your machine (→ Set-Up Sheet).• When you receive a fax call: The machine will ring according to thering pattern you have chosen and receive the fax automatically.• When you receive a voice call: The machine will ring according to thering pattern you have chosen. Pick up the handset to answer the call.Setting DRPDYour telephone company will assign a distinctive ring pattern to each number when youorder the DRP service.Follow this procedure to set the fax ring pattern that matches the pattern assigned bythe telephone company.1 Open the one-touch speed dialing panel.2 Press Data Registration.3 Press Set.4 Use ∂ or ¨ to select RX SETTINGS. RX SETTINGSUSER SETTINGSDATA REGSTRATION
