8-8Activity report _________________________________Summarises the information for the sending and receiving activities of your fax after 20transactions. For automatic printing, see ACTIVITY REPORT, p. 8-3.Transactions in an activity report are listed chronologically.One-touch speed dialling list __________________Lists the numbers and names registered under one-touch speed dialling buttons.Coded speed dialling list ______________________Lists the numbers and names registered under coded speed dialling codes.User’s data list _________________________________Lists the current settings of the fax and the registered sender information.Doc. memory list ______________________________Lists the documents currently stored in the fax’s memory (see p. 5-14).TX (Transmission) report_______________________You can set the fax to print an activity report every time you send a document. See TX REPORT,p. 8-3.RX (Reception) report __________________________Normally the fax does not print an activity report for receiving, but you can set the fax to print anactivity report every time you receive a document. See RX REPORT, p. 8-3.You can set the fax to print an activity report only when an error occurs during receiving. See RXREPORT, p. 8-3.Multi TX/RX (Transaction) report ______________Lists the result of a sequential broadcasting.If you set the fax to print activity reports (TX REPORT or RX REPORT) and then use sequentialbroadcasting, a MULTI TX/RX REPORT will be printed instead of a TX (Transmission) REPORT.See TX REPORT, p. 8-3.n A memory clear report is printed automatically when power is restored after a power failure. SeeMemory clear report, p. 9-19.
