1-6Connecting the AC power cord ________________Plug the fax into a 200–240 volt AC 50/60 Hz outlet.1 Plug the power cord connector into the rear of the fax.2 Plug the other end of the power cord into a properly grounded AC power outlet.n There is no power switch on the fax. The power is on as long as the fax is plugged in.Setting the language and country _____________When you plug in the fax for the first time, you need to select the correct language for the LCDdisplay and reports, and the country* of use. See pp. 2-2, 2-3 for the buttons on the operation panel.1 Press [Start/Copy].2 Use [3] or [4] to select the preferred language for the LCD display and reports.▼Press [Start/Copy].Wait a second for COUNTRY SELECT* to appear.▼Press [Start/Copy].OTHERS3 Use [3] or [4] to select the country where you are using the fax*.▼Press [Start/Copy].Registration ends and the fax enters standby mode.* This setting is only available for some countries.
