5-9SENDING DOCUMENTS5Redialling when the line is busyThere are two methods of redialling: manual redialling and automatic redialling. This sectionexplains these two methods.Manual redialling ______________________________Press [Redial/Pause] to dial the last number you dialled with the numeric buttons. (This startsredialling regardless of whether automatic redialling is enabled.)■ Cancelling manual rediallingTo cancel manual redialling, press [Stop].Automatic redialling ___________________________■ What is automatic redialling?When you are sending a document and the receiving party’s line is busy, the fax waits the specifiedtime and then dials the same number again. You can set the fax to redial several times if previousattempts fail because of a busy signal.Automatic redialling can be turned off and on. The number of redialling attempts and the timeinterval between attempts can also be adjusted (see AUTO REDIAL, p. 8-3).If all redialling attempts are unsuccessful, the fax will cancel the transmission and print an ERRORTX REPORT to remind you that the transmission was not completed (see p. 8-7).When automatic redialling is in use, the LCD displays AUTO REDIAL while it is waiting to redial.■ Cancelling automatic rediallingAutomatic redialling cannot be cancelled with the [Stop] button while the fax is waiting to redial.1 Wait until the fax begins redialling.2 Press [Stop].nIf you want to cancel a memory-sending transmission while the fax is waiting to redial, you willhave to delete the document from memory (see p. 5-15).
