5-10■ Setting the options for automatic rediallingYou can set the following options for automatic redialling:• Whether or not the fax redials automatically.• The number of times the fax attempts to redial.• The time interval between redialling attempts.1 Press [Function].▼Press [Start/Copy].USER SETTINGS2 Use [3] or [4] to select TX SETTINGS.▼Press [Start/Copy].ECM TX3 Use [3] or [4] to select AUTO REDIAL.▼Press [Start/Copy].• To disable automatic redialling, use [3] or [4] to select OFF, then press [Start/Copy]. Press [Stop] toreturn to standby mode.• To enable automatic redialling, use [3] or [4] to select ON and continue with the steps below.ON4 Press [Start/Copy] twice.2TIMES5 Use the numeric buttons to enter the number of times you want the fax to redial.You can select from 1 to 10 times (see p. 8-3).▼Press [Start/Copy] twice.2MIN.6 Use the numeric buttons to enter the time interval between redialling attempts.You can select from 2 to 99 minutes (see p. 8-3).▼Press [Start/Copy].7 Press [Stop].The fax returns to standby mode.
