7-121 Press [Function].▼Press [Start/Copy].USER SETTINGS2 Use [3] or [4] to select TAM SETTINGS.▼Press [Start/Copy].MESSAGE LENGTH3 Use [3] or [4] to select FWD SETTINGS.▼Press [Start/Copy].OFF4 Use [3] or [4] to select ON.▼Press [Start/Copy] twice.TEL=5 Use the numeric buttons to enter the forwarding number.A maximum of 40 digits can be entered.▼Press [Start/Copy].6 Press [Stop].Setting ends and the fax returns to standby mode.This feature allows you to automatically forward telephone messages, recorded when the fax is setto TAM MODE, to a registered forwarding number.You can use remote control to access the forwarding number and listen to your telephone messages.n • You must register a forwarding number and set TAM MODE before you can use this feature. Remotecontrol cannot be used to set this feature unless a forwarding number has been registered.• If you set FWD SETTINGS to ON when a forwarding message has not been recorded, you will heara tone instead of a forwarding message when telephone messages are forwarded.Setting the forwarding number ________________Forwarding telephone messages
