5-5SENDING DOCUMENTS5Cancelling sending1 Press [Stop].n• When you cancel sending, you may need to press [Start/Copy] for a few seconds, then the faxwill feed out the document.• The fax prints an ERROR TX REPORT (see p. 8-7).Automatic diallingSending a document using one-touch speeddialling or coded speed dialling numbers ______To use this feature you must first register numbers for one-touch speed dialling (see pp. 2-10, 2-11)or coded speed dialling (see p. 2-12).1 Load the document face up into the document tray.See Loading documents, p. 3-2.You can set the scanning resolution and the contrast (see p. 5-1).2 Press the one-touch speed dialling button under which the number you wish to fax isregistered.TEL= 905 795 1111-or-Press [Coded Dial/Directory] and enter the appropriate two-digit coded speed dialling code.The registered name and number appear.• If you make a mistake, press [Stop]. Then press the correct one-touch speed dialling button or press[Coded Dial/Directory] and re-enter the code.• If an error message appears on the LCD, correct the error and press [Stop]. If necessary, see Faxingproblems, p. 9-9.TEL= 1 49 39 25 253 Press [Start/Copy].The fax begins sending.
