5-3SENDING DOCUMENTS5Memory sending _______________________________The fax normally uses direct sending to send your document, but you can send it with memorysending (see below). In this case, the fax quickly scans the document into memory. Then it sends thedocument from memory. This means you do not have to wait for the fax to finish sending before youcan retrieve your original document.You can send up to 15 A4-size pages at a time with memory sending (based on the Canon FAXStandard Chart No.1, standard resolution).n If MEMORY FULL appears on the LCD when you load the document into the document tray or duringthe scanning process, re-start sending the document using direct sending (see p. 5-2).1 Load the document face up into the document tray.See Loading documents, p. 3-2.You can set the scanning resolution and contrast (see p. 5-1).2 Press [Function].▼Press [Send Options].3 Use [3] or [4] to select MEMORY TX.▼Press [Start/Copy].4 Dial the receiving party’s fax number.Use one of the dialling methods described in this chapter (see p. 5-2).TEL= 345678905 Press [Start/Copy] twice.The fax scans the document into memory and begins sending.
