7-17USING THE BUILT-IN ANSWERING MACHINE (TAM MODE) (FAX-B140 only)Before you use TAM MODE, you must record an outgoing message. Use the microphone on theoperation panel to record your outgoing message. Only one outgoing message, no longer than 20seconds, can be recorded.Types of messages that can be recorded ______OUTGOING MESSAGE: Answering machine messageALT OUTGOING MSG: Answering message only, used when the recording time is set to 0 orthe memory is full. Caller cannot leave a message.VOICE MEMO: See p. 7-6.FAXTEL MESSAGE: Message played when the Fax/Tel mode is set.FORWARDING MSG: Message played when any new telephone messages are forwarded to aforwarding number.Recording the outgoing message ______________To record another type of message, select the type of message you want to record in step 1, and thenfollow the procedure below to record it.Recording the outgoing messageUSING THE BUILT-IN ANSWERING MACHINE (TAM MODE) (FAX-B140 only)1 Use [3] or [4] to select OUTGOING MESSAGE.2 Press [Record] and speak into the microphone to record your outgoing message.The remaining recording time is displayed on the LCD.-or-Press [Start/Copy], use [3] or [4] to select RECORD and press [Start/Copy] again. Then speakinto the microphone to record your outgoing message.TIME LEFT 193 Press [Stop] twice when recording is finished.You can record an alternative outgoing message, fax/telephone switching message or forwardingmessage by selecting the appropriate option in step 1 above and then continuing on to steps 2 and 3.nYou cannot delete the OUTGOING MESSAGE. To record a new outgoing message, repeat steps 1to 3 above. The old outgoing message will be automatically deleted when you record your newmessage.7
