8-2DATE & TIMEUNIT TELEPHONE #UNIT NAMETX TERMINAL IDTTI POSITIONTELEPHONE # MARKSCAN CONTRASTOFFHOOK ALARMVOLUME CONTROLLINE MONITOR VOLCALLING VOLUMEALARM VOLUMEKEYPAD VOLUMERX CALL LEVELTEL LINE TYPER-KEY SETTINGPSTNPBX: ACCESS TYPEACCESS NUMBERAUTO VOICE DIAL–––ON/OFFINSIDE IMAGE/OUTSIDE IMAGETEL/FAXSTANDARD/DARKER/LIGHTERON/OFF–0 (off)/1/2/31/2/30 (off)/1/2/30 (off)/1/2/3STANDARD/HIGHTOUCH TONE/ROTARY PULSEPSTN/PBX–PREFIX/HOOKING–ON/OFFUSER SETTINGSNameDescriptionSettingsSet the date and time (24-hour clock) using the numericbuttons.Enter your fax number using the numeric buttons.This is the name that appears at the top of each fax pageyou send (see p. 2-6).This option sets the parameters for the identification headerthat appears on every page you send.Select the position of the TTI.Select the icon for the fax number.Set the density of the reproduction.Enable/disable the off hook alarm. The alarm alerts you thatthe handset is not seated properly in its cradle.Set the volume of the fax sounds.Set the volume of the line monitor (sound during dialling).Set the volume of the ring produced when the fax detects avoice call during FAX/TEL switchover.Set the volume of the error alarm sound.Set the volume of the keypad.Set the ring tone.Set the dialling method the fax uses to match the type ofphone line you have.Set the type of PBX through which your fax is connected.Your fax is connected to an outside line.Your fax is connected through a PBX.If you select PREFIX, you can enter an outside line number ofup to 19 digits.Enable/disable automatic dialling for UCanTalk.
