8-4* Only available in some countries.RX REDUCTIONFIXED REDUCTIONREDUCE DIMENSIONPAPER SIZEEnable/disable reduction for received documents.Select the reduction rate.Select reduction in height only or both width and height.Select the size of the loaded fax paper.ON/OFFSTANDARD/A4➝LTR/LGL➝LTRVERTICAL ONLY/HORIZ & VERTICALA4/LTR/LGLPRINTER SETTINGSNameDescriptionSettingsRX SETTINGSNameDescriptionSettingsECM RXFAX/TEL AUTO SWRING START TIMEF/T RING TIMEDEFAULT ACTIONINCOMING RINGRING COUNTMAN/AUTO SWITCHRING TIMEREMOTE RXREMOTE RX IDMEMORY RXCALLER ID*Enable/disable error correction during reception.Enable/disable FAX/TEL switchover. When ON, this featureanswers calls, and if no fax tone is detected, the fax rings toalert you of an incoming call.Set the duration that the fax listens for a fax tone beforestarting to ring.Set the length of time the fax will ring to alert you of anincoming call.Select the action taken after the F/T RING TIME expires.When the handset or an extension phone is connected, setthe fax to ring when it receives a call.Set the number of incoming rings before the fax answers.Determine if the fax switches to document receive modeafter the fax rings for a specified time when the fax is in themanual receive mode.Set the amount of time the fax will ring before switching todocument receive mode.Enables/disables remote receiving.If you set REMOTE RX to ON, you can select the remotereceiving ID.Turn on/off memory receiving of a document.Determine if the fax displays the caller’s name and faxnumber when receiving a call.ON/OFF8 seconds (0 to 30)22 seconds (10 to 60)DISCONNECT/RECEIVEON/OFF2 times (1 to 99)ON/OFF15 seconds (1 to 99)ON/OFF25 (00 to 99)ON/OFFON/OFF
