1-91SETTING UPInstalling the BJ cartridgeThe first time you set up your fax, you have to install the BJ cartridge before you can beginreceiving and copying documents.For information on replacing the BJ cartridge, see p. 9-6.Guidelines _____________________________________• Use only a Canon BX-3 Black BJ cartridge in your fax.• Store BJ cartridges at room temperature.• When the BJ cartridge print head is left exposed, it easily dries out and becomes unusable. Toavoid this, keep the followings:– Keep BJ cartridges in the packaging until you are ready to use them.– Never remove the BJ cartridge unless you are going to replace it.– Keep the cartridge holder in the home position (on the right side of the fax) when you are notusing the fax.• Replace BJ cartridges after one year of use.n If you need to unplug the fax, wait until it returns to standby mode (time and receive mode displayed onthe LCD). Otherwise the cartridge holder may not be in its home position; causing the BJ cartridge toremain uncapped and dry out.c • Store BJ cartridges out of the reach ofchildren. If a child inadvertently ingestsink, consult a physician immediately.• Do not touch the precision componentson the BJ cartridge.The ink in the BJ cartridge is difficult to clean up if spilled. Follow the precautions below whenhandling the BJ cartridge.• Carefully remove packaging from BJ cartridges.• Do not attempt to disassemble or refill BJ cartridges.• Do not shake or drop BJ cartridges.Do not touch these metallic areas.
