97Shoot by Lighting or Scene Type4 On the Quick Control screen,select the lighting or scene type.Press the <Q> button (7).Press the <V> key to select [Default setting]. [Light/scene-based shots] will appear on thescreen.Press the <U> key to select thedesired lighting or scene type.X The resulting image with the selectedlighting or scene type will bedisplayed.5 Take the picture.Press the shutter button completely totake the picture.To return to viewfinder shooting,press the <0> button to exit LiveView shooting. Then press the shutterbutton completely to take the picture.If you change the shooting mode orset the power switch to <2>, thesetting will revert back to [ Defaultsetting].If you use flash, the setting will switch to [ Default setting]. (However,the shooting information will display the lighting or scene type that wasset.)If you want to set this together with [Ambience-based shots], set thelighting or scene type that best matches the ambience you have set. Inthe case of [Sunset], for example, warm colors will become prominent sothe ambience you set may not work well.If you do not want the Live View image to be displayed when settingfunctions, press the <Q> button after step 1 and set [Light/scene-basedshots].
