96In the <2>, <3>, <4>, and <5> Basic Zone modes, you can shootwhile the settings match the lighting or scene type. Normally, [Default setting] is adequate, but if the settings match the lightingcondition or scene, the picture will look more accurate to your eye.For Live View shooting, if you set both [Light/scene-based shots] and[Ambience-based shots] (p.92), you should first set [Light/scene-based shots]. This will make it easier to see the resulting effect on theLCD monitor.1 Set the shooting mode to <8>.Set one of the following: <2>, <3>,<4>, or <5>.2 Set the Live View shooting/Movieshooting switch to <A>.3 Display the Live View image.Press the <0> button to display theLive View image.Shoot by Lighting or Scene TypeLighting or scene 82 3 4 5Default setting k k k kDaylight k k k kShade k k k kCloudy k k k kTungsten light k k kFluorescent light k k kSunset k k k k