347Preparing to Print6 Play back the image.Press the <x> button.X The image will appear, with the <w>icon on the upper left of the screen toindicate that the camera is connectedto a printer.wPictBridgeMake sure the printer has a PictBridge connection port.Movies cannot be printed.The camera cannot be used with printers compatible only with CP Director Bubble Jet Direct.Do not use any interface cable other than the one provided.If there is a long beeping sound in step 5, it indicates a problem with theprinter. Resolve the problem displayed in the error message (p.354).Printing is not possible when shooting mode is set to <F> or <G>, MultiShot Noise Reduction is set, or HDR mode is set.If [53: Wi-Fi] is set to [Enable], direct printing is not possible. Set it to[Disable], then connect the interface cable.You can also print RAW images taken with this camera.If you use a battery pack to power the camera, make sure it is fullycharged. With a fully-charged battery, printing up to approx. 4 hours ispossible.Before disconnecting the cable, first turn off the camera and printer. Holdthe plug (not the cord) to pull out the cable.For direct printing, using AC Adapter Kit ACK-E6 (sold separately) topower the camera is recommended.
