3 Setting the Date, Time, and Zone384 Set the date and time.Press the <U> key to select thenumber.Press <0> so <r> is displayed.Press the <V> key to set thenumber, then press <0>. (Returnsto <s>.)5 Set the daylight saving time.Set it if necessary.Press the <U> key to select [Y].Press <0> so <r> is displayed.Press the <V> key to select [Z],then press <0>.When the daylight saving time is setto [Z], the time set in step 4 willadvance by 1 hour. If [Y] is set, thedaylight saving time will be canceledand the time will go back by 1 hour.6 Exit the setting.Press the <U> key to select [OK],then press <0>.X The date/time/zone and daylightsaving time will be set and the menuwill reappear.If you store the camera without the battery or if the camera’s batterybecomes exhausted, the date/time/zone may be reset. If this happens, setthe time zone and date/time again.The date/time that was set will start from when you press <0> in step 6.After changing the time zone, check that the correct date/time has beenset.