65You can display the electronic level on the LCD monitor and in theviewfinder to help correct camera tilt. Note that you can check only thehorizontal tilt and not the forward/backward tilt.1 Press the <B> button.Each time you press the <B>button, the screen display willchange.Display the electronic level.If the electronic level does notappear, set [53: z buttondisplay options] so that theelectronic level can be displayed(p.394).2 Check the camera’s tilt.The horizontal tilt is displayed in 1°increments. The tilt scale is marked in5° increments.When the red line turns green, itindicates that the tilt is almostcorrected.Q Displaying the Electronic LevelDisplaying the Electronic Level on the LCD MonitorHorizontal levelEven when the tilt is corrected, there may be a margin of error of ±1°.If the camera is very tilted, the electronic level’s margin of error will belarger.During Live View shooting and before movie shooting (except with u+Tracking), you can also display the electronic level as described above(p.218, 258). Note that the electronic level cannot be displayed during movieshooting. (The electronic level will disappear when you start shooting amovie.)
