93Shoot by Ambience SelectionX The LCD monitor will display how theimage will look with the selectedambience.5 Set the ambience effect.Press the <V> key to select theeffect bar so that [Effect] appears atthe bottom.Press the <U> key to select thedesired effect.6 Take the picture.Press the shutter button completely totake the picture.To return to viewfinder shooting,press the <0> button to exit LiveView shooting. Then press the shutterbutton completely to take the picture.If you change the shooting mode orset the power switch to <2>, thesetting will revert back to[ Standard setting].The Live View image shown with the ambience setting applied will notlook exactly the same as the actual photo.Using flash may minimize the ambience effect.In bright outdoors, the Live View image you see on the LCD monitor maynot have exactly the same brightness or ambience as the actual photo.Set [52: LCD brightness] to 4 and look at the Live View image while theLCD monitor is unaffected by outside light.If you do not want the Live View image to be displayed while settingfunctions, press the <Q> button after step 1 and set [Ambience-basedshots] and [Effect].
