243Using AF to Focus (AF Method)The dedicated AF sensor is used to focus in One-Shot AF mode(p.100), using the same AF method as with viewfinder shooting.Although you can focus the target area quickly, the Live View imagewill be interrupted momentarily during the AF operation.In AF area selection modes other than 19-point automatic selection AF,you can manually select the AF point. In Basic Zone modes, 19-pointautomatic selection AF is set automatically.1 Display the Live View image.Press the <0> button.X The Live View image will appear onthe LCD monitor.If the AF area selection mode is set to19-point automatic selection AF, theArea AF frame will be displayed.With FlexiZone - Single (manualselection), the AF point will bedisplayed as a small frame.With Zone AF (manual zoneselection), the frame indicating thezone is displayed .2 Select the AF area selectionmode and AF point. NPress the <B> button to display thecurrent AF area selection mode.Each time you press the <B> button,the AF area selection mode changes.When the AF area selection mode isFlexiZone - Single (manual selection)or Zone AF (manual zone selection),you can select the AF point (or zone).Quick Mode: fArea AF frame
