Before You Start60You can set how long the image is displayed on the LCD monitorimmediately after capture. To keep the image displayed, set [Hold]. Tonot have the image displayed, set [Off].1 Select [Image review].Under the [z1] tab, select [Imagereview], then press <0>.2 Set the desired time.Select the desired setting, then press<0>.The shooting function settings screen (p.49) can be set to display orturn off when you press the shutter button halfway.1 Select [LCD off/on btn].Under the [52] tab, select [LCD off/on btn], then press <0>.2 Set the desired setting.Select the desired setting, then press<0>.[Remains on]: Display remains on even when you press the shutterbutton halfway. To turn off the display, press the<B> button.[Shutter btn.]: When you press the shutter button halfway, thedisplay will turn off. When you let go of the shutterbutton, the display will turn on.3 Setting the Image Review Time3 Turning the LCD Monitor Off/OnIf [Hold] is set, the image will be displayed until the auto power off timeelapses.