P Multiple ExposuresN1763 Set [Multi-expos ctrl].Select the desired multiple-exposurecontrol method, then press <0>.AdditiveThe exposure of each single exposure is added cumulatively. Basedon the [No. of exposures], set a negative exposure compensation.Refer to the basic guide below to set a negative exposurecompensation.Exposure Compensation Setting Guide for Multiple ExposuresTwo exposures: -1 stop, three exposures: -1.5 stop, four exposures:-2 stopsAverageBased on the [No. of exposures], negative exposure compensationis set automatically as you shoot multiple exposures. If you shootmultiple exposures of the same scene, the exposure of the subject’sbackground will be automatically controlled to obtain a standardexposure.4 Set the [No. of exposures].Press the <V> key to select thenumber of exposures, then press<0>.You can set it from 2 to 9 exposures.If [Additive] is set, the image displayed during shooting may look noisy.However, when you finish shooting the set number of exposures, noisereduction will be applied and the final multiple-exposure image will lookless noisy.
