59Before You StartYou can prevent the beeper from sounding when focus is achieved,during self-timer operation, and during touch screen operations.1 Select [Beep].Under the [z1] tab, select [Beep],then press <0>.2 Select [Disable].Select [Disable], then press <0>.X The beeper will not sound for anyoperation.If [Touch to ] is selected, thebeeper will be silent for touch screenoperations only.To save battery power, the camera turns off automatically after a settime of idle operation elapses. If you do not want the camera to turn offautomatically, set this to [Disable]. After the power turns off, you canturn on the camera again by pressing the shutter button or otherbuttons.1 Select [Auto power off].Under the [52] tab, select [Autopower off], then press <0>.2 Set the desired time.Select the desired setting, then press<0>.3 Disabling the Beeper3 Setting the Power-off Time/Auto Power OffEven if [Disable] is set, the LCD monitor will turn off automatically after 30min. to save power. (The camera’s power does not turn off.)
