CONTINUEDTo install a LATCH-compatible childseat:Move the seat belt buckle ortongue away from the loweranchors.Your vehicle is equipped withLATCH (Lower Anchors andTethers for CHildren) at the outerrear seats.Make sure there are no objectsnear the anchors that couldprevent a secure connectionbetween the child seat and theanchors.The lower anchors are locatedbetween the seat-back and seatbottom, and are to be used only witha child seat designed for use withLATCH.The location of each lower anchor isindicated by a small button above theanchor point.Turn the ignition switch to the ON(II) position, then push the rearhead restraint tilt button on theceiling console to pivot the headrestraints down.1.2.3.Installing a Child SeatInstalling a Child Seat withLATCHDriver and Passenger Safety47REAR HEAD RESTRAINT TILT BUTTONLOWER ANCHORSBUTTON11/07/20 18:05:44 31SJA670_052
