Push down on thelever to signal a left turn and up tosignal a right turn. To signal a lanechange, push lightly on the lever,and hold it. The lever will return tocenter when you release it orcomplete a turn.The rotating switchon the left lever controls the lights.Turning this switch to the ‘‘ ’’position turns on the parking lights,taillights, instrument panel lights,side-marker lights, and rear licenseplate lights.Turning the switch to the ‘‘ ’’position turns on the headlights. Ifyou leave the lights on with theignition switch released after turnedto the LOCK (0) position or whenthe built-in key is removed from theignition switch, you will hear areminder chime when you open thedriver’s door.When the light switch is in the‘‘ ’’ or ‘‘ ’’ position, thelights on indicator comes on as areminder. This indicator stays on ifyou leave the light switch on andturn the ignition switch to theACCESSORY (I) or the LOCK (0)position.To switch from lowbeams to high beams, push the leftlever forward until you hear a click.The blue high beam indicator willcome on (see page ). Pull it backto return to low beams. To flash thehigh beams, pull the lever backlightly, then release it. The highbeams stay on as long as you holdthe lever back.Turn SignalOffParking and instrument panelAUTOHeadlights onHigh beamsFlash high beamsFog lights offFog lights on651.2.3.4.5.6.7.8.9.Turn SignalHeadlightsHigh BeamsTurn Signals and Headlights14011/07/20 18:17:25 31SJA670_145