Push the end of the cover on theblade assembly until the other endis pivoted out, and remove thecover.Disconnect the blade assemblyfrom the wiper arm by removingthe two screws from the arm.Adjust the windshield wiper armsto the winter position by holdingboth wiper arms as shown in theillustration at the same time (seepage ). Raise the wiper armsoff the windshield.Check the condition of the wiperblades at least every 6 months.Replace them if you find signs ofcracking in the rubber, areas that aregetting hard, or if they leave streaksand unwiped areas when used.2.1.3.139Wiper Blades478COVERSCREWSWIPER ARMSHOLDING LOCATIONSBLADEDo not open the hood when the wiperarms are raised, or you will damagethe hood and the wiper arms.11/07/20 19:03:12 31SJA670_483
