The handle of each front door has asensor. That sensor works with theremote so you can automaticallyunlock/lock the door(s).By default, only the driver’s doorunlocks when you grab its handle.If a remote is within operating rangewhile you wash your vehicle or whenit is raining heavily, the door sensorsmay respond by unlocking the doors.The unlock sensors do not operatewhen:The remote is not within theoperating range.The remote is too close to thevehicle.When the doors are unlocked.The remote battery is dead.The vehicle battery is dead.If you do not open any of the doorswithin 30 seconds, they willautomatically relock.If you wear a glove while grabbing afront door handle, the door sensormay be slow to respond or may notrespond by unlocking the doors.To change the ‘‘KEYLESS ACCESSBEEP’’ setting, see page .To change the ‘‘KEYLESS ACCESSLIGHT FLASH’’ setting, see page.When you unlock the door(s), someexterior lights blink twice and thesystem beeps twice.All the doors unlock when you grabthe handle of the front passenger’sdoor.To change the ‘‘DOOR UNLOCKMODE’’ setting, see page .To unlock the remaining doors andthe trunk, press the UNLOCKbutton on the remote or the rear ofthe master door lock switch on thedriver’s door.109111113Unlocking the Door(s)Keyless Access System Instruments and Controls16911/07/20 18:21:30 31SJA670_174
