B.13 T: Motor TuningEnter data into the following parameters to tune the motor and drive for optimal performance.u T1: Induction Motor Auto-TuningNo.(Addr.Hex) Name Description Values PageT1-01(701) Auto-Tuning ModeSelection2: Stationary Auto-Tuning for Line-to-Line Resistance3: Rotational Auto-Tuning for V/f Control (necessary for Energy Savings andSpeed Estimation Speed Search)Default: 2Range: 2, 3 132T1-02(702) Motor Rated PowerSets the motor rated power as specified on the motor nameplate.Note: Use the following formula to convert horsepower into kilowatts:1HP = 0.746 kW.Default: <1>Min.: 0.00 kWMax.: 650.00 kW132T1-03(703) Motor Rated VoltageSets the motor rated voltage as specified on the motor nameplate. Default: 200.0 V<2>Min: 0.0Max: 255.0 <2>132T1-04(704) Motor Rated CurrentSets the motor rated current as specified on the motor nameplate. Default: <1>Min.: 10% of driverated currentMax.: 200% ofdrive rated current133T1-05(705) Motor Base Frequency Sets the rated frequency of the motor as specified on the motor nameplate. Default: 60.0 HzMin.: 0.0Max.: 400.0 133T1-06(706) Number of Motor Poles Sets the number of motor poles as specified on the motor nameplate. Default: 4Min.: 2Max.: 48 133T1-07(707) Motor Base Speed Sets the rated speed of the motor as specified on the motor nameplate. Default: 1750 r/minMin.: 0Max.: 24000 133T1-11(70B) Motor Iron LossSets the iron loss for determining the Energy Saving coefficient.The value is set to E2-10 (motor iron loss) set when the power is cycled. IfT1-02 is changed, a default value appropriate for the motor capacity that wasentered will appear.Default: 14 W <3>Min.: 0Max.: 65535133<1> Default setting is dependent on parameter o2-04, Drive Model Selection.<2> Values shown are specific to 200 V class drives. Double the value for 400 V class drives. Multiply the value by 2.875 for 600 V class drives.<3> Default setting value differs depending on the motor code value and motor parameter settings.B.13 T: Motor Tuning478 YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
