u Drive Label Warning ExampleAlways heed the warning information listed in Figure i.3 in the position shown in Figure i.4.WARNINGRead manual before installing.Wait 5 minutes for capacitordischarge after disconnectingpower supply.To conform to requirements,make sure to ground the supplyneutral for 400V class.After opening the manual switchbetween the drive and motor,please wait 5 minutes beforeinspecting, performingmaintenance or wiring the drive.Risk of electric shock.Hot surfacesTop and Side surfaces maybecome hot. Do not touch.●●●●●Figure i.3 Warning Information ExampleWarning Label600V 3Phase 5.5kW/3.7kWFigure i.4 Warning Information Positionu Warranty Informationn RestrictionsThe drive is not designed or manufactured for use in devices or systems that may directly affect or threaten human lives orhealth.Customers who intend to use the product described in this manual for devices or systems relating to transportation, healthcare, space aviation, atomic power, electric power, or in underwater applications must first contact their Yaskawarepresentatives or the nearest Yaskawa sales office.WARNING! Injury to Personnel. This product has been manufactured under strict quality-control guidelines. However, if this product is tobe installed in any location where failure of this product could involve or result in a life-and-death situation or loss of human life or in a facilitywhere failure may cause a serious accident or physical injury, safety devices must be installed to minimize the likelihood of any accident.i.2 General SafetyYASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual 25
