u Verifying Parameter Changes: Verify MenuThe Verify Menu lists edited parameters from the Programming Mode or as a result of Auto-Tuning. The Verify Menu helpsdetermine which settings have been changed, and is particularly useful when replacing a drive. If no settings have been changed,the Verify Menu will read “None”. The Verify Menu also allows users to quickly access and re-edit any parameter settingsthat have been changed.Note: The Verify Menu will not display parameters from the A1 group (except for A1-02) or E5-01 even if those parameters have been changedfrom their default settings.The following example is a continuation of the steps above. Here, parameter C1-02 is accessed using the Verify Menu, andis changed again from 10.0 s to 20.0 s.To check the list of edited parameters:Step Display/Result1. Turn on the power to the drive. The initial display appears.- MODE -U1-01= 0.00HzU1-02= 0.00HzU1-03= 0.00ADRVFREF (OPR)RdyJOG FWD FWD/REVLSEQLREF2. Press or until the display shows the top of the Verify Menu.- MODE - PRGModified ConstsHELP DATAFWDModifiedX Parameters3.Press to enter the list of parameters that have been edited from their original defaultsettings.If parameters other than C1-02 have been changed, use or to scroll until C1-02appears.C1-02 = 20.0sec(0.0~6000.0)“10.0sec”FWD- VERIFY - PRGAccel Time 1RdyHome DATA4. Press to access the setting value. Left digit flashes.FWDC1-01=0020.0sec(0.0~6000.0)“10.0sec”- VERIFY - PRGAccel Time 1RdyHome DATA4.3 The Drive, Programming, and Clock Adjustment Modes120 YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
