Xerox Phaser 8200 Networking Setup Manual

Also see for 8200B - Phaser Color Solid Ink Printer: User guide Quick guide Advanced features and troubleshooting manual Installation Specifications

Contents

Xerox Phaser 8200 Networking Setup Manual Manual pdf 9 page image

IP AddressPhaserÆ 8200 Color Printer 4DNS setup using CentreWare Internet ServicesAfter setting the printerís IP address, you can set up the printer for DNS using CentreWare IS.1. Connect to the printer via CentreWare IS by entering your printerís IP address into your browser.2. On the right side of the main CentreWare IS page, click Properties.3. In the Protocols group, click TCP/IP.4. Under DNS Settings, select ON for Domain Name Service Resolver.5. Enter the following information: Primary Name Server IP Address (required) Second Name Server IP Address (optional)6. When you are finished entering the settings, click Save Changes at the bottom of the screen.Dynamic Domain Name Service (DDNS)This printer supports Dynamic DNS through DHCP. You must have DHCP enabled for DDNS tofunction. To enable DHCP:1. Connect to the printer via CentreWare IS by entering your printerís IP address into your browser.2. On the right side of the printerís main CentreWare IS page, click Properties.3. On the left side under Protocols, click TCP/IP.4. Set the BOOTP/DHCP option to ON.To enable DDNS, enter the following DDNS/WINS settings information: DDNS - Set to ON. Release Host Name - Set to NO. DDNS/WINS Name - Use the default name provided by Xerox or enter another name. Primary Name Server IP Address (optional) Second Name Server IP Address (optional)5. When you are finished entering the settings, click Save Changes at the bottom of the screen.