Xerox Phaser 8200 Networking Setup Manual

Also see for 8200B - Phaser Color Solid Ink Printer: User guide Quick guide Advanced features and troubleshooting manual Installation Specifications

Contents

Xerox Phaser 8200 Networking Setup Manual Manual pdf 7 page image

IP AddressPhaserÆ 8200 Color Printer 2 PostScript Utility files can be used on hosts that do not have BOOTP or DHCPó see the ReadMefile on your printerís CD-ROM. The PC ReadMe file is in the UTILS directory; the MacintoshReadMe file is in the Network Utilities folder.NoteWhen two or more IP address methods are used simultaneously, the printer uses the firstaddress that it successfully obtains.Setting the IP address from the front panelFor information about using the front panel, refer to the Front Panel section of the Phaser 8200 ColorPrinter User Guide on the Software and Documentation CD-ROM.NoteDHCP must be set to OFF before you can set the IP address from the printerís front panel.1. With Menus highlighted, press the OK key.2. Press the Scroll Down key to scroll to the Network Setup Menu.3. Press the OK key.4. Scroll to TCP/IP Address.5. Press the OK key.6. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first digit of theaddress, then press the OK key to accept that digit.7. Repeat step 6 for each remaining digit.8. Scroll to TCP/IP Network Mask and press the OK button.9. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first digit of theaddress, then press the OK key to accept that digit.10. Repeat step 9 for each remaining digit.11. Scroll to TCP/IP Gateway and press the OK button.12. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first digit of theaddress, then press the OK key to accept that digit.13. Repeat step 12 for each remaining digit.14. To exit the menu system, scroll to Exit and press the OK key.Information Required for IP AddressingInformation CommentsInternet (IP) address for the printer Format is xxx.xxx.xxx.xxx, where xxx represents a decimal numberfrom 0 - 255.Network Mask If you are unsure, leave this blank; the printer chooses anappropriate mask.Default Router/Gateway address If you want to communicate with the printer from anywhere otherthan the local network segment, you need the router address.