Xerox Phaser 8200 Networking Setup Manual

Also see for 8200B - Phaser Color Solid Ink Printer: User guide Quick guide Advanced features and troubleshooting manual Installation Specifications

Contents

Xerox Phaser 8200 Networking Setup Manual Manual pdf 8 page image

IP AddressPhaserÆ 8200 Color Printer 3Enabling DHCP on the printerMake sure that the printerís DHCP protocol is enabled by setting the front panel or usingCentreWare IS.NoteTo determine your printerís IP address, select Printer Identification using the front panel orprint a copy of the Configuration Pages. For information about using the front panel, refer tothe Front Panel chapter of the Phaser 8200 Color Printer User Guide on theSoftware and Documentation CD-ROM.Setting the IP address using CentreWare Internet ServicesCentreWare IS is a printer administration and support tool using web technology. With CentreWare ISsoftware, you can access printer status and manage your printer over a TCP/IP network using a webbrowser. For more information, see page 7 in the Printer Management section.After setting the printerís IP address by another method, you can perform the rest of the TCP/IPconfiguration using CentreWare IS.1. Connect to the printer via CentreWare IS by entering your printerís IP address into your browser.2. On the right side of the printerís main CentreWare IS page, click Properties.3. On the left side under Protocols, click TCP/IP.4. Enter your printerís settings and click Save Changes at the bottom of the page.Resetting the printer using CentreWare Internet Services1. Connect to the printer via CentreWare IS by entering your printerís IP address into your browser.2. On the right side of the main CentreWare IS page, click Properties.3. Under the General tab, select Resets.4. Click Reset Printer. The printer does not update the web page until it finishes resetting.Domain Name Service (DNS)The printer supports DNS through an embedded DNS stub resolver. The DNS resolver protocolcommunicates with one or more DNS servers to request the IP address for a given host name or the hostname for a given IP address.To use an IP host name for the printer, the system administrator must have configured one or more DNSservers and a local DNS domain name space database.To set up the printer for DNS, supply up to two DNS name server IP addresses. There are two ways toset up the printer: DHCP TCP/IP ó See the next section.