Xerox Phaser 8200 Networking Setup Manual

Also see for 8200B - Phaser Color Solid Ink Printer: User guide Quick guide Advanced features and troubleshooting manual Installation Specifications

Contents

Xerox Phaser 8200 Networking Setup Manual Manual pdf 37 page image

PhaserÆ 8200 Color PrinterCopyright © 2002 Xerox Corporation. All Rights Reserved. 32Novell NetWare 3.x/4.x/5.x NetworkThis section provides installation and troubleshooting steps for Novell NetWare (3.x/4.x/5.x): Quick setup ó see page 32. Advanced setup ó see page 33. NetWare 3.x/4.x/5.x print server setup ó see page 33. Setup with CentreWare DP ó see page 33. Novell NetWare troubleshooting ó see page 34.Configuration software for NetWare networksFor Windows environments, the following software is available: CentreWare DP - Use this application to configure the printer and the network when usingNetWare 3.x, 4.x and 5.x. See the Advanced Network Management Tools CD-ROM for theCentreWare DP software and documentation. Novell NWAdmin - Use this utility to manage existing queues on networks running NetWare 4.xor 5.x in NDS or NDPS/NEPS mode.The Configuration Pages report information that you need for NetWare configuration. On theConfiguration Pages, all zeros in the IPX Networks fields indicates that the printer does not recognizethe network connection; this probably indicates a faulty cable connection, an incorrect frame type, orReply to Get Nearest Server has not been set to On. It must be set to On for at least one file server orrouter on the same segment as the printer.NoteFor more information about the Xerox NDPS/NEPS solution, see the CentreWare for NDPSUser Guide on the Advanced Network Management Tools CD-ROM or see the Xeroxweb site at www.xerox.com/officeprinting/support.Quick setup1. Print the Configuration Pages and retain them for reference. For information on printingConfiguration Pages, refer to the Front Panel section of the Features Guide on your printerís CD-ROM.2. Check the Configuration Pages and verify that Novell enable=On and correct Frame Type is set.3. Install CentreWare DP from the Advanced Network Management Tools CD-ROM on aWindows-based workstation.4. Run the CentreWare DP application and choose Setup Wizard from the Printer menu. NetWare3.x users should select the bindery server install and follow the Setup Wizard steps. NetWare 4.xand 5.x users should select the NDS install and follow the Setup Wizard steps.5. Install print drivers from your printerís Software and Documentation CD-ROM.6. Send a print job to the printer.