Xerox Phaser 8200 Networking Setup Manual

Also see for 8200B - Phaser Color Solid Ink Printer: User guide Quick guide Advanced features and troubleshooting manual Installation Specifications

Contents

Xerox Phaser 8200 Networking Setup Manual Manual pdf 19 page image

Windows 95 / Windows 98 / Windows Me NetworkPhaserÆ 8200 Color Printer 14Other methods of installationPhaserPort softwareThe Xerox installer for Windows automatically installs PhaserPort for Windows (for those installationsusing PostScript drivers). PhaserPort for Windows is a Xerox print monitor for printing overWindows 95 / Windows 98 / Windows Me TCP/IP peer-to-peer networks.Changing a PhaserPort IP addressIf the IP address of the printer is changed, change the IP address of the corresponding port:1. From the Start menu, select Settings, then click Printers.2. In the Printers window, right-mouse click your printer, then click Properties.3. In the Properties dialog, click Details.4. Verify that PhaserPort appears in the Print to the following port field and click Port Settings.5. In the Configure PhaserPort dialog, enter the correct IP address or DNS name for the printer. Ifyou donít know the printerís IP address or DNS name, click Browse to display a list of printers onthe network. Double-click the printer you want; PhaserPort automatically enters the informationinto the Configure PhaserPort dialog. To search the network again, click Refresh; to expand thesearch to other subnets, click Advanced.6. Click OK.7. Click OK again to apply the changes.Windows 95 / Windows 98 / Windows MetroubleshootingThis troubleshooting section assumes you have completed the following tasks: You have a basic operating knowledge of your Windows version. You have loaded a Phaser printer PCL or PostScript print driver. You have printed and retained a current copy of the Configuration Pages. For information on usingthe front panel or printing Configuration Pages, see the Front Panel chapter of thePhaser 8200 Color Printer User Guide.1. Verify that the printer is plugged in, turned on, and connected to an active network.2. Verify that the printer is receiving network traffic by monitoring the LEDís on the back of theprinter or on the CentreDirect External Print Server. When the printer is connected to afunctioning network receiving traffic, its link LED is green, and its traffic LED (amber) is flashingrapidly.3. From a workstation desktop, use the right-mouse button and select Network Neighborhood. Withthe left-mouse button, select Properties from the cascade menu.