Xerox Phaser 8200 Networking Setup Manual

Also see for 8200B - Phaser Color Solid Ink Printer: User guide Quick guide Advanced features and troubleshooting manual Installation Specifications

Contents

Xerox Phaser 8200 Networking Setup Manual Manual pdf 35 page image

Macintosh EtherTalk Network (MacOS 8.x/9.x/X, version 10.1)PhaserÆ 8200 Color Printer 30Quick install steps for MacOS X, version 10.1RequirementsEnsure that you are running MacOS X, version 10.1. The previous versions of MacOS X does not fullysupport PostScript printing and printer features.Setting up the Macintosh Ethernet port for TCP/IP orAppleTalkIf your Macintosh is not already set up for TCP/IP, perform the following procedure:1. From the System Preferences application, select Network. Select TCP/IP.2. From the Active Ports menu, check Built-In Ethernet.3. From the TCP/IP tab, specify how you will obtain the IP address: Manually or by DHCP.4. If you select Manually, specify the IP address in the dialog box. You also need to enterinformation for the Subnet Mask, Router Address, and Name Server Address.5. If you wish to use AppleTalk, select the AppleTalk tab and select Make AppleTalk Active.6. Close the dialog box.Creating an LPR printer with MacOS X, version 10.11. Open the Print Center Utility. (This Apple utility is usually found in a directory called Utilitiesin the Applications directory.)2. Select Add Printer, then select LPR Printers Using IP from the pull-down menu.3. In the LPR Printerís Address field, enter the printer's IP address or host name.4. In the Queue field, enter PS (all upper-case). Click OK.5. Under the Printer Model pull-down menu, select the appropriate PPD from the list. If yourprinterís PPD is not listed, install it from the printerís Software and Documentation CD-ROM.6. Click Add to complete the configuration.Creating an AppleTalk printer with MacOS X, version 10.11. Ensure that AppleTalk is enabled in System Preferences.2. Open the Print Center Utility. (This Apple utility is usually found in a directory called Utilitiesin the Applications directory.)3. Select Add Printer, then select AppleTalk from the pull-down menu.4. Select the appropriate zone.5. Choose your printer from the list provided.6. Under the Printer Model pull-down menu, select the appropriate PPD from the list. If yourprinterís PPD is not listed, install it from the printerís Software and Documentation CD-ROM.7. Click Add to complete the configuration.