Toshiba Magnia 3200 User Manual

Also see for 3200: Owner's manual

Contents

Getting Started Removing and replacing the server panels 33Removing the top panel (rack models)Follow these steps to remove the top panel:1 Shut down the server, turn off the power, and unplug the power cable.2 Unplug the display cable, keyboard cable, and others as appropriate.3 Loosen the 2 screws securing the server to the rack.4 Grasp the handles on the server’s front panel, and carefully slide the server from therack until the rail latches lock the server in its fully-extended position.Pulling out the server (rack model)5 Turn the side panel lock to release the lock.6 Slide the top panel towards the rear of the server to remove it.Replacing the top panel (rack models)Follow these steps to replace the top panel:1 Carefully slide the top panel onto the server.2 Turn the side panel lock to the locking position.3 Press the rail latches inward to release the server from its locked position, then slidethe server into the rack.4 Tighten the two screws to secure it.5 Plug in all cables.6 Plug in the power cable.