System Configuration Setup Onboard SCSI Utility 109SCSI Utility keyboard commandsSetting devicesPlace the system in device setting screen mode, then select SYM53C1010 to display thefollowing screen:Adaptec utility screen❖ Adapter PropertiesSpecifies the SCSI controller.❖ SCSI Parity YesControls whether the host adapter performs parity checks and scans for normal datatransfer through the SCSI bus.❖ Host SCSI ID [7]ID number of Host Adapter on this bus.❖ SCSI BusScan Order Low to HighSets the sequence of on-board SCSI devices. Do not change this setting. Returns control to the previous screen mode. Specifies a data item.<↑> Returns control to the previous data item.<↓> Advances control to the next data item.Symbios PCI SCSI Configuration Utility Version PCI-X.XX.XXAdapter PropertiesAdapter PCI Dev/Bus FuncSYM53C1010 1 20SCSI Parity [Yes]Host SCSI ID [ 7]SCSI Bus Scan Order [Low to High(0...Max)]Removable Media Support [None]CHS Mapping [SCSI Plug and Play Mapping]Spinup Delay(Secs) [ 2]Secondary Cluster Server[No]Termination Control [Auto]F1 =help ArrowKeys =Select Item -/+ =Change [Item]Esc =Abort/Exit Home/End =Select Item Enter =Execute
