Server Setup Tool Additional Software Manual Installations 172Setup of the RAID Controller UtilityIf the RAID controller is connected to the server, be sure to set up the “MegaRAIDManager” that is a RAID Controller Utility after installing NetWare. If the MegaRAIDManager is not set up, the system cannot be recovered from a disk error duringoperation.Additional Software Manual InstallationsThis section reviews additional software manual installations.HarnessEye/webWhen Windows 2000 / Windows NT Server 4.0 is installed using the Server Setup Tool,the Agent function of the HarnessEye/web can be automatically installed.To manually install the HarnessEye/web, or to install the Management Console functionor the Management Proxy function from the SST CD-ROM, follow the procedure belowafter installing Windows 2000/Windows NT Server 4.0.1 Start Windows 2000/Windows NT Server 4.0 and log on as the Administrator (or auser having equivalent rights).2 Insert the SST CD-ROM.3 Open the command prompt.4 Change the current directory to the following:\PUBLIC\UTILS\TOSHIBA\HEYE5 Enter the following command:SETUPFor more information on the HarnessEye/web installation, refer to the HarnessEye/webUser’s Guide.Toshiba Display Power Save DriverThe Toshiba Display Power Save Driver is a device driver for Windows 2000 that controlsthe monitor’s power-saving function. After selecting Install Windows 2000 in the SSTprocedure, the driver will be automatically installed.To manually install the driver from the SST CD-ROM, follow the procedure below afterinstalling the Windows 2000:1 Log onto Windows 2000 as the Administrator (or a user having equivalent rights).2 Insert the SST CD-ROM.
