Management Software Using HarnessEye/web 199If you use this method for displaying SCSI RAID information, install the SNMP agentusing the SCSI RAID utility.Item ExplanationSpinup Delay Displays the spin-up delay.Spinup Count Displays the spin-up count.Scan Channels Displays the number of scan channels.Logical Displays information on the logical drive.Index Displays the index number of the array’s logical drive .Status Displays the status of the logical drive.Size In MB Displays the capacity of the logical drive.Raid Level Displays the RAID level.Stripe Size Displays the stripe size.Read Policy Displays the read policy.Write Policy Displays the write policy.Cache Policy Displays the cache policy.Number Of Spans Displays the number of arrays spanned by this logical drive.Number Of Stripes Displays the number of stripes.Check Consistencyor InitializeDisplays the progress of consistency checking or initialization,depending on the status of this logical drive.[For example, “Check Consistency” (4) or “Initialize” (3).]Physical Displays information on the physical drive.Channel Displays the adapter channel number that the disk isconnected to.Index Displays the number of the physical drive.Status Displays the status of the physical drive.Array Position Displays the array position.Size in MB Displays the capacity of the physical drive in megabytes.Device Type Displays the device type.Inquiry String Displays the SCSI inquiry character string.SCSI Level Displays the SCSI level.Que Depth Displays the maximum number of this device que.Rebuild Progress Displays the rebuild progress.Medium Errors Displays the number of device medium errors.Slot Status Displays the status of the slot.Slot Number Displays the number of the slot.Other Errors Displays the number of errors other than device mediumerrors.
